Bitumen membranes is bitumen-polymer, roll, roofing, waterproofing material of European level. Aquaizol TM  Ruberoid TM

Bitumen membranes is bitumen-polymer, roll, roofing, waterproofing material which improved reability. Aquaizol TM Ruberit TM

The AQUAIZOL Roofing Membranes Factory was founded in 1998 and today it is one of the leading Ukrainian enterprises producing roofing and waterproofing membranes based on the modified bitumen.
The range of products includes more than 42 names of roofing and waterproofing materials on the substrate of glassfibber or polyester.
Polymer additives in the coating paste determine the following physical and mechanical properties of Aquaizol bitumen membranes:

  • • high heat resistance,
  • • stability and flexibility at low temperatures,
  • • resistance to abrasion and squeezing,
  • • low deformation under load, compatibility with other roofing materials and concrete.

Temperature range of SBS-modified materials in comparison with APP is shifted towards lower temperatures, they also have greater flexibility. However, it does not mean that the APP-modified materials are worse. In our climatic conditions the use of the both classes of materials is justified, with the only difference that Aquaizol_SBS can be rolled and laid even in winter.

Reinforcing substrate serves to impart to bitumen membranes the required mechanical strength and stress distribution. The AQUAIZOL Bitumen Membranes and Ruberit are produced on fiberglass of the leading European manufacturers and on the polyester of own production.
These materials can withstand high tensile load, they are not hygroscopic, do not rot, are able to adapt flexibly to changing position of the supporting basis at significant deformations.
Shale or granite dressing compound protects the roof from UV rays and mechanical damage, giving it a nice, finished look.
High reliability of the products of the AQUAIZOL Roofing Membranes Factory is the result of careful selection of raw materials and constant quality control at all stages of production.

Bitumen membranes is bitumen-polymer, roll, roofing, waterproofing material of European level. Aquaizol TM  Ruberoid TM

Industrial equipment provides a continuous cycle of work and allows to produce more than 30 thousand square meters of high quality Aquaizol bitumen- polymer membranes per shift and to execute special orders with the improved mechanical and technical characteristics.

Aquaizol

Bitumen membranes thickness depends on the amount of bitumen- polymer binder at 1 sq.m. The AQUAIZOL Roofing Membranes Factory produces bitumen-polymer materials for the lower layer of the roof mat (without dressing compound) with the weight 2 to 3.5 kg/m2 and materials for the upper layer (with dressing compound) with the weight of 3.5 to 5 kg/m2. All manufactured materials are fully compatible with each other, allowing performing roofing works of the various complexities optimally selecting the value-money ration for the end consumers.

Research laboratory work and design department is aimed at improving the production base of the plant and the development of new products. Broad business and dealer network allows our customers to save money when purchasing materials and provides the ability of quick receiving of the necessary consultation and supporting documents. The Aquaizol roll roofing materials have gained popularity in Ukraine. Due to the use of the AQUAIZOL roofing materials of domestic production the construction companies managed to decrease the cost of performance of roofing work more than in a half, and “bitumen membranes” previously available only to the most highly profitable businesses became accessible to a wide range of customers.

Модифицированные материалы
Модифицированные материалы
Модифицированные материалы
Модифицированные материалы

Price list of 12.10.2020

Name
Weight, kg/m Base Heat resistance,
оС
не ниже
Flexibility on
a bar, оС
Price UAH, per m2
type of sprinkle
bazalt (PB) slate (PS)
Status
O – under the order
from 2000 m2
S – serial
type of sprinkle
bazalt (PB) slate (PS)
Ruberit ECO
Roll length – 15 m, width – 1 m, film/film – for lining layer
Roll length – 10 m, width – 1 m, film/P - bazalt – for upper layer.
Operating temperature -25/+90оС. Modifier-plastomers. The warranty period is 15 years.
2,0 fiberglass 90 -5 35,94 З
2,5 fiberglass 90 -5 37,68 С
2,5 polyester 90 -5 43,98 С
4,0 fiberglass 90 -5 45,18 С
4,0 polyester 90 -5 53,22 С
Ruberit
Roll length – 15 m, width – 1 m, film/film – for lining layer
Roll length – 10 m, width – 1 m, film/P- bazalt, PS-slate – for upper layer.
Operating temperature -35/+110 оС. Modifier-plastomers. The warranty period is 15 years
2,5 fiberglass 100 -7 39,96 З
2,0 polyester 100 -7 44,46 З
2,5 polyester 100 -7 45,96 С
3,5 fiberglass 100 -7
45,54
49,26
З
З
4,0 fiberglass 100 -7
48,18
51,84
З
З
3,5 polyester 100 -7
52,68
55,86
З
З
4,0 polyester 100 -7
55,98
58,68
С
С
Aquaizol ECO
Roll length – 10 or 15 m, width – 1 m, film/film – for lining layer
Roll length – 10 m, width – 1 m, film/ P - bazalt, PS - slate – for upper layer.
Operating temperature -40/+110 оС. Modifier-APP. The warranty period is 20 years.
2,5 fiberglass 100 -12 40,86 С
3,0 fiberglass 100 -12 46,86 З
2,5 polyester 100 -12 47,76 С
3,0 polyester 100 -12 52,68 С
4,0 polyester 100 -12 65,34 З
4,0 fiberglass 100 -12
48,60
52,68
С
С
4,0 polyester 100 -12
56,94
59,94
С
С
Aquaizol APP
Roll length – 15 m, width – 1 m, film/film – for lining layer
Roll length – 10 m, width – 1 m, film/ P - bazalt, PS - slate – for upper layer.
Operating temperature -40/+125 оС. Modifier-APP. The warranty period is 20 years.
2,0 fiberglass 110 -12 43,98 З
2,5 fiberglass 110 -12 44,94 З
3,0 fiberglass 110 -12 51,96 З
2,0 polyester 110 -12 48,60 С
2,5 polyester 110 -12 50,94 С
3,0 polyester 110 -12 57,66 С
3,5 fiberglass 115 -12
52,86
55,86
З
З
4,0 fiberglass 115 -12
55,68
59,70
З
З
3,5 polyester 115 -12
58,92
63,48
З
З
4,0 polyester 115 -12
63,96
66,96
С
С
4,5 polyester 115 -12
69,96
73,62
С
С
5,0 polyester 115 -12
77,94
81,24
З
З
Aquaizol SBS
Roll length – 15 m, width – 1 m, film/film – for lining layer
Roll length – 10 m, width – 1 m, film/ P - bazalt, PS - slate – for upper layer.
Operating temperature -45/+115 оС. Modifier-SBS. The warranty period is 20 years.
2,5 polyester 100 -15 53,64 З
3,0 polyester 100 -15 58,38 С
4,0 polyester 100 -15
63,54
68,70
З
С
Aquaizol ELAST

Roll length – 7,5/10 m, width – 1 m, film/ P - bazalt, PS - slate – for upper layer.
Operating temperature -50/+120 оС. Modifier-SBS. The warranty period is 20 years.
4,0 polyester 100 -20
66,90
69,96
З
З
4,5 polyester 100 -20
74,34
78,96
З
С
5,0 polyester 100 -20
82,56
86,58
З
С
Aquaizol ELAST-PE-6,5-PB or PS
6,5 polyester 100 -20
106,98
109,98
З
С
Aquaizol WATERPROOFING
Roll length – 10 m, width – 1 m, film/film, Operating temperature -50/+130 оС. Modifier-SBS. The warranty period is 20 years.
3,0 polyester 100 -20 70,86 С
3,5 polyester 100 -20 77,40 С
4,0 polyester 100 -20 83,10 З