Special aerator for shingles is roofing system element that provides ventilation of the roof space. It shall be positioned over hole in the OSB- 3 plate at a distance of 0.5-0.8 m from the ridge of the roof, while air flow is provided at the eaves. Difference in heights creates a pressure drop whereby moisture evaporates from the heater and takes away by the motion of air flow. Thus, insulation remains dry and retains its properties. It is necessary for each roof slope to install at least one ventilation element (but not less than one element for every 60 m2 of the roof). .
Color: black, green, red, brown.
Glass wool insulation ISOVER
ISOVER is a lightweight fiberglass insulation of the highest quality glass wool in form of plates, which has premium heat conductivity. Saint-Gobain company (France) produces insulating materials solely on the basis of the superthin staple glass fiber, high insulation is determined by the presence of still air. This explains the low thermal conductivity of ISOVER product. ISOVER product not deteriorates, not changes size and retain insulating properties during lifetime of the building. When extreme day and night temperature difference, in all seasons, even in northern climates, ISOVER products excellently save their size. Due to its structure with open porosity glass-wool provides the best sound absorption compared with other known materials today.
Basaltic insulation Termolife
Mineral wool products Termolife is fibrous material produced on the basis of basalt materials. It has good heat and sound insulation properties, high physical and mechanical indicators, hydrophobic and bactericidal properties, high resistance to chemical attack. Mineral wool products Termolife is non-combustible material. The environmental safety is one of the distinctive features of Termolife products.
OSB-3 Compo Boards
Oriented water-resistant chipboard OSB-3 is wood-material produced by pressing of flat rectangular chips under high pressure and temperature using special water-resistant resins and fillers. Due to the special structure boards OSB-3 are resistant to mechanical stress, high humidity and temperature loads.
Ventilation outlet with penetrant structure
Sewer system must be equipped with ventilation outlets to prevent unpleasant odours and damage of entire system (produced gases are destructive for sewers). Ventilation outlet with the hood is ventilation outlet with sewer pipe with diameter of 110 mm. Penetrant structure to ventilation outlets under shingles is pass element for soft roofing. It is used to ventilation outlet installation.
Colour: black, green, red, brown.
Chimney hood is manufactured on request according to the dimensions provided by customer; it is made of colour coated metal. It is also possible to manufacture hoods on the fence on request.Colours: black, green, red, brown.
Soffit is special panel of PVC (polyvinylchloride) for filing cornice and pedimental overhangs, ceilings. Soffit not affected to rot, corrosion, and it not require for painting, it is simple and easy to install. Soffit planks with perforation provide ventilation of roof space.
Durability is at least 25 years at the temperature differences between -50 °C to +60 °C.
Euro barrier is super diffusion polypropylene three-ply roofing membrane. It secures the insulation and roof construction from moisture and decay. It is applied to insulated pitched roofs.
Hydro barrier is vapour permeable micropunched three-ply under roofing film. It provides the protection of the under roof attic space from rain, snow, dust as well as the ventilation of the water vapour from the interior due to micro punches. It is applied to the non-insulated pitched roofs.
Vapour barrier is a three-ply vapour proof under roofing film. It provides the protection of insulation against the penetration of vapour from inside the room. It is applied to the insulated pitched roofs and wall constructions.
PROFIL Rainwater system (Poland)
PROFIL Rainwater drainage system is designed for organized derivation of rain and melt water from the roofs of living houses, industrial buildings, farm buildings and garden structures. PROFIL Rainwater system is produced of high quality PVC, which is characterized by the high mechanical strength, chemical resistance and light weight. The system flawlessly withstands extreme loads in the form of torrential rains in summer and freezing of ice in winter. The drains may be used at temperatures ranging from -50 °C to +60 °C.
Snow-stops for shingles
Purpose of the snow-stops:• to keep the snow on the roof for the further heat saving of building;
• to prevent a slide of the large amounts of snow while melting to ensure the safety of people and vehicles that are in the yard;
• to prevent the breakage and destruction of the drainage system.